• Pneumatic operated device capable of dispersing a precise quantity of grease, dope and/or lubrication, uniformly and repeatable, on the entire thread of the tubular tool joint or coupling.
• Can be used on the drilling rig floor, shop floor and in tubular production facilities.
Thread Cleaner
• pneumatic operated device capable of cleaning the pin & box threads of the tubular tool joint or coupling.
• Uses rotating brushes and a solvent to clean the thread
• The filter retains the solids, allowing the solvent to pass to the collection tank for immediate re-use.
Spill Vacuum Cleaner
• Using a pneumatic vacuum pump to suck-up drilling mud, completion fluids and other spills.
• Equipped with an automatic shut-off, when the tank reservoir is full.
• Can be used on the rig floor, substructures and any other surfaces in the work environment.
Hose Winder
• Uses compressed air to wind up the 2” suction hose of a stand-alone or of the Spill Vacuum Cleaner
Compact Mud Bucket
• Energizes a seal around the tubular to prevent mud from spilling over the rig floor
• Providing additional protection to the environment as well as safety by reducing slippage in the work area.
Pneumatic Mud Bucket
• Self-centering around the tubular and very ergonomically.
• Safe tool for easy non-manual use around the rig floor.
• Providing additional protection to the environment as well as safety by reducing slippage in the work area.
Mud Bucket and Recovery System
• Provides a complete system to recover waste spillage of drilling mud.
• The overall system will be the optimum economical tool protecting the environment while increasing the safety on the rig floor.
